QTE-300 SG
2-axis turning center to process wide variety of parts with high efficiency
- Integral spindle / motor for high-accuracy, high-speed machining
- 12 position / 8 position (option) drum turret with minimum interference
- Simple and compact machine designed for high cost performance
- MAZATROL conversational programming
- Touch screen - Operates similar to your smartphone / tablet
- New functions for high-speed, high-accuracy
High-torque spindle
The spindle is designed to provide high-torque machining in the low-speed range. In addition to its high rigidity, the high acceleration and deceleration increases productivity.
Turrets
The bolt-on tool holders are rigidly mounted on the turret by 4 bolts. Thanks to a servo driven motor, drum turret features high-speed, non-lift turret indexing with minimum interference. Tool shank ☐25mm ensures high rigidity machining.
Machine specificaties
| Basismachine 500 mm centerlengte | Waardes | |
|---|---|---|
| CAPACITEIT : | Maximum zwaaidiameter | 695 mm |
| Klauwplaatdiameter | 10 " | |
| Maximum draaidiameter | 350 mm | |
| Maximum stafdiameter | 80 mm | |
| Hoofdspil | Maximum toerental | 4,000 min-¹ |
| Motor vermogen ( 40% ED rating) | 18.5 kW | |
| Continu vermogen | 15.0 kW | |
| Koppel hoofdspil | 387.0 Nm | |
| REVOLVERKOP | Aantal gereedschapsposities | 12 |
| Aantal gereedschappen | 12 | |
| LOSSE KOP | Centerboring ( morsekonus) | MK Nr. 5 |
| IJLGANGEN | IJlgang X-as | 30 m/min |
| IJlgang Z-as | 30 m/min | |
| Verplaatsing (X-as) | 215 mm | |
| Verplaatsing (Z-as) | 605 mm | |
| Basismachine 1000 mm centerlengte | Waardes | |
|---|---|---|
| CAPACITEIT : | Maximum zwaaidiameter | 695 mm |
| Klauwplaatdiameter | 10 " | |
| Maximum draaidiameter | 350 mm | |
| Maximum stafdiameter | 80 mm | |
| Hoofdspil | Maximum toerental | 4,000 min-¹ |
| Motor vermogen ( 40% ED rating) | 18.5 kW | |
| Continu vermogen | 15.0 kW | |
| Koppel hoofdspil | 387.0 Nm | |
| REVOLVERKOP | Aantal gereedschapsposities | 12 |
| Aantal gereedschappen | 12 | |
| LOSSE KOP | Centerboring ( morsekonus) | MK Nr.4 |
| IJLGANGEN | IJlgang X-as | 30 m/min |
| IJlgang Z-as | 30 m/min | |
| Verplaatsing (X-as) | 215 mm | |
| Verplaatsing (Z-as) | 1,120 mm | |